Name: LIBERTY Asphalt Primer
Brand: GAF

About LIBERTY™ Asphalt Primer

LIBERTY™ Asphalt Primer is a foundation coating that promotes an excellent bond for all types of asphalt-based roofing materials, such as LIBERTY™ Self-Adhering Base/Ply Sheet & Cap Sheet.

Installation based on applicator type:

Roller: Apply smooth, heavy coat using parallel strokes for uniformity.
Brush: Apply smooth, heavy coat using parallel strokes for uniformity. If the first coat is fully absorbed, apply a second coat.
Spray: A high-quality 45:1 sprayer is recommended. Consult the manufacturer for optimum PSI, tip size, length of hose, and number of spray guns required for a uniform coat.pressure so that a bead of cement is visible at joint edge.

The right foundation for a variety of roof systems and materials

Create a strong bond for masonry roofs, walls, or floors prior to the use of asphalt cutback adhesives or application of hot-mopped or cold-applied built-up roofing materials.

EXCELLENT PENETRATION

The primer penetrates deeply to create a deep, durable bond for coating and adhesives.
STRENGTH AND FLEXIBILITY

Tenacious bonding accommodates temperature-related expansion and contraction of the roof system.
EASY APPLICATION

Brush, roll, or spray this primer that also maintains excellent low-temperature flexibility.

LIBERTY™ Asphalt Primer SDS - 4133

Safety Data Sheets
- PDF
LIBERTY™ Premuium Asphalt Primer - RESLB119

Data Sheets
- PDF
RESLB100-PDF-1023_Liberty-System-Sell-Sheet

Data Sheets
- PDF
RESLB100S-PDF-1023_Liberty System Sell Sheet_SPANISH

Data Sheets
- PDF
RESLB300-0723_Limited Warranty on LIBERTY SBS Self-Adhering Materials_TRILINGUAL

Warranties
- PDF
RESLB507-PDF-1223_Liberty Calculator

Installation Instructions and Guides
- PDF
RESWT176 - Golden Pledge Limited Warranty Addendum for Low-Slope Roofs

Warranties Guarantess and Addendums
- PDF
RESWT177 - System Plus Limited Warranty Addendum for Low-Slope Roofs

Warranties Guarantess and Addendums
- PDF
RESWT220 - Silver Pledge Limited Warranty Addendum for Low-Slope Roofs

Warranties Guarantess and Addendums
- PDF

LIBERTY™ SBS Self-Adhering Roofing System Installation — Step-by-step*

Step 1

Inspect the roof, and repair or replace damaged areas.
Step 2

Apply LIBERTY™ Asphalt Primer at a rate of a 1/2 gallon per 100 sq. ft.
Optional (for 2-ply system):

Install LIBERTY™ Self-Adhering Base/Ply.
Step 3

Install edge flashing at all eave and rake edges, and apply LIBERTY™ Flashing Cement on exposed flange.
Step 4

Install LIBERTY™ Self-Adhering Cap Sheet.
Step 5

Clean up by removing tools, unused materials, and other debris. Plan on inspecting roof annually if possible.